Apple mills and presses

Winegrowers Supplies - Pack Presses and associated Washers/Elevators/Mills

Voran hydraulic Pack Presses:-

Note: the Voran 50P1 (50 litre) is too expensive for it's size, it's much better to use a water pressure press.

   Voran 100P1: 3,180 Euros + delivery
                                                 (about 360 Euros).
     Throughput up to 300 kgm/hour, 1.5kW 380V motor.
     Single bed press, complete with ten 50cm x 50cm
       acacia racks and nine 80cm x 80cm press-cloths.
     265 kilos (310 kilos with the AMH mill attached, as in
     the photo. The mill is optional, 1220 Euros extra),
       1280mmL x 1030mmW x 1450mmH.

    Voran 100P2-S: 3,820 Euros + delivery
                                                 (about 495 Euros).
    Twin sliding bed press allowing a second 'cheese' to
       be made while the first is pressing.
Throughput up to 500 kgm/hour, 1.5kW 380V motor.
    Complete with twenty 50cm x 50cm acacia racks and
      eighteen 80cm x 80cm press-cloths.
      295 kilos (340 kilos with the AMH mill attached as in
      the photo. The mill is optional, 1220 Euros extra),
    2080mmL x 1030mmW x 1450mmH.

Customer feedback: 100P2-S with AMH mill: "just to let you know, we started to press this week, and the machine works brilliantly! so much quicker and easier than our old methods. Would recommend one to anyone! Thanks again for all your help.".

Voran 100P2-D: 4,900 Euros + delivery
(about 495 Euros).

   Twin swivel bed press allowing a second 'cheese'
      to be made while the first is pressing.
   Throughput up to 600 kgm/hour, 1.5kW 380V motor
   Complete with twenty 50cm x 50cm acacia racks
     and eighteen 80cm x 80cm press-cloths.
     295 kilos, 2080mmL x 1030mmW x 1450mmH.

Voran 180P2-D: 9,940 Euros + delivery (about 595 Euros according to location).
    Twin swivel bed press allowing a second 'cheese' to be made while the first is pressing.
    Throughput up to 1200 kgm/hour, 1.5kW 380V motor. 820 kilos, 2300mmL x 840mmW x 1850mmH.
    Complete with twenty four 65cm x 65cm acacia racks and twenty two 100cm x 100cm press-cloths.
    Optional hydraulic lifting/lowering device 1300 Euros extra.

photo of Voran 180P2-D together with Voran WALC washer, elevator and mill:-

If you do not have a 380 volt (3-phase) electricity supply: 230 volt to 380 volt inverters

Replacement acacia or stainless steel press 'racks', and polyester press cloths:-

Voran acacia 'racks', 10mm thick:-
         36cm x 36cm, 27.70 Euros
         41cm x 41cm, 30.36 Euros
         45cm x 45cm, 31.68 Euros
         50cm x 50cm, for 100 litre press, 35.64 Euros
         55cm x 55cm, 40.92 Euros
         65cm x 65cm, for 180 litre press, 54.12 Euros
         80cm x 80cm, for 300 litre press, 66 Euros
         90cm x 90cm, 75 Euros

Voran stainless steel 'racks', 14mm thick:-
50cm x 50cm, for 100 litre press, 59.40 Euros
65cm x 65cm, for 180 litre press, 92.40 Euros

Voran polyester press cloths, for apples, hemmed on all 4 sides:-
         65cm x 65cm, 15.84 Euros
         70cm x 70cm, 18.48 Euros
         75cm x 75cm, 21.12 Euros
         80cm x 80cm, for 100 litre press, 23.76 Euros
         90cm x 90cm, 26.40 Euros
       100cm x 100cm, for 180 litre press, 29.04 Euros
       110cm x 110cm, 31.68 Euros
       120cm x 120cm, 34.32 Euros
       140cm x 140cm, for 300 litre press, 51.48 Euros

160cm x 160cm, 56.00 Euros
190cm x 190cm,

A finer weave is available for pressing berries.

Voran washer, elevator and mill: all in one unit, for cleaning and milling apples and other fruit.
For hygienic processing, these machines produce the ideal pulp-consistency for pressing:-

   Voran SA: without mill 4790 Euros + delivery,
                   with mill 6480 Euros + delivery.
     Throughput up to 1000 kgm/hour.
       2105mm long x 660mm wide x 2055mm high.
       380 volt, 3-phase motor, 0.37 kW for the elevator
       and 3KW for the Mill. Weighs 100 kilos.

For use with any of the pack presses.

   Voran WA LC: with mill
      Throughput up to 2000 kgm/hour.
      1794mm long x 590mm wide x 2100mm high.
      380 volt, 3-phase motors, 1.5 kW for the
      elevator and 3KW for the RM3 mill. Weighs 180 kilos.

      This can be linked up to the following:-
        Pack presses: 100P2-D: 8550 Euros + delivery,
                            180P2-D: 9250 Euros + delivery.